船舶机舱自动集中监测报警系统结构与功能分析   总被引：1，自引：0，他引：1  

张峰 《海岸工程》2001,20(2):52-56

船舶机舱集中监测与报警系统目前已在船舶设计制造中得以广泛应用。对其组成、工作流程及功能进行了较为系统的阐述 ,为船舶使用者提供借鉴  相似文献   

Use of an optical oxygen sensor to measure dissolved oxygen in seawater     

Hiroshi Hasumoto  Tsuneo Imazu  Toshiaki Miura  Kazuhiro Kogure 《Journal of Oceanography》2006,62(1):99-103

The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method. The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the results with those of the titration method indicate that the sensor would be useful for fieldwork.  相似文献   

高精度CTD剖面仪研制过程中的专用设备   总被引：1，自引：1，他引：1  

王欣 《海洋技术学报》2001,20(1):140-142

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。  相似文献   

压力传感器的自动标定技术     

王莉娜  赵先龙  阮锐  严晓明 《海洋测绘》2007,27(4):78-80

针对压力测量设备生产和维护过程中,对关键部件压力传感器标定处于手工操作状态、效率低、操作人员不易掌控、标定结果处置复杂的现状,开发了针对压力传感器的自动标定技术。该技术将计算机控制、智能化、曲线拟合和误差分析引入到压力传感器的标定过程中,大幅度提高了标定的效率和可靠性。经此技术标定过的压力探头,在使用中具有互换性,减轻了数据后处理工作的难度。  相似文献   

一种新型测向传感器——磁通门罗盘     

胡平  孟宪萍  江钩仁 《海洋与湖沼》1992,23(3):318-324

本文对磁通门罗盘的基本工作原理、实验线路以及主要技术指标和一些测量数据作简要介绍,最后对仪器的误差进行简单分析并提出一些减小误差的改进措施。  相似文献   

装载GPCTD传感器的海翼水下滑翔机观测数据实时质量控制     

刘增宏  许建平  俞建成 《海洋学报(英文版)》2020,39(3):130-140

Profiles observed by Sea-Wing underwater gliders are widely applied in scientific research. However, the quality control(QC) of these data has received little attention. The mismatch between the temperature probe and conductivity cell response times generates erroneous salinities, especially across a strong thermocline. A sensor drift may occur owing to biofouling and biocide leakage into the conductivity cell when a glider has operated for several months. It is therefore critical to design a mature real-time QC procedure and develop a toolbox for the QC of Sea-Wing glider data. On the basis of temperature and salinity profiles observed by several Sea-Wing gliders each installed with a Sea-Bird Glider Payload CTD sensor, a real-time QC method including a thermal lag correction, Argo-equivalent real-time QC tests, and a simple post-processing procedure is proposed. The method can also be adopted for Petrel gliders.  相似文献   

Numerical simulation of deep-hole resistivity anomaly caused by drilling construction in Xinfengjiang geoelectric station     

Xing Yan  Zhihui Deng  Jiping Liu  Shishan Ye  Zhiqun Chen  Tianren Zhong 《地震研究进展（英文）》2022,2(3):100139

The Xinfengjiang reservoir in Guangdong Province, is one of the large reservoirs that have triggered earthquakes of magnitude greater than 6. Numerous earthquakes have occurred since the impoundment of the reservoir, making it one of the most active seismic zones in south China. In 2015, a set of deep-hole resistivity anomalies was observed in the Heping geoelectric station in Dongyuan county, located near the Xinfengjiang reservoir. After a field investigation, we found that a planned well drilling construction of new measuring channels was being carried out during that corresponding period of time. After careful comparison and analysis on the basis of the collected raw data, we had a reason to believe that drilling construction, rather than the inducement of the Xinfengjiang reservoir, was the main culprit for those unusual georesistivity values. So as to verify the above conjecture, we constructed a series of 3D finite element models based on the geological and hydrological information around Heping station and analyzed the drilling disturbances, respectively. Some significant conclusions were finally drawn according to the precise numerical simulation. This study gives a good example by combining numerical simulation with engineering practice as a way to understand the root cause of georesistivity anomalies in reality.  相似文献   

黑河流域生态—水文过程综合遥感观测联合试验总体设计   总被引：17，自引：4，他引：13  

李新  刘绍民  马明国  肖青  柳钦火  晋锐  车涛  王维真  祁元  李弘毅  朱高峰  郭建文  冉有华  闻建光  王树果 《地球科学进展》2012,27(5):481-498

介绍了"黑河流域生态—水文过程综合遥感观测联合试验"的背景、科学目标、试验组成和试验方案。试验的总体目标是显著提升对流域生态和水文过程的观测能力,建立国际领先的流域观测系统,提高遥感在流域生态—水文集成研究和水资源管理中的应用能力。由基础试验、专题试验、应用试验、产品与方法研究和信息系统组成。其中,①基础试验:搭载微波辐射计、成像光谱仪、热像仪、激光雷达等航空遥感设备,开展一系列关键生态和水文参量的观测;发展遥感正向模型及反演和估算方法。形成覆盖全流域的水文气象综合观测网,为流域生态—水文模型研究提供更有代表性的模型参数、驱动数据及更高精度的验证数据。构建无线传感器网络,度量生态水文模型所需的若干关键的驱动、参数和模型状态的空间异质性。开展航空遥感定标和地基遥感试验。依托传感器网络,并辅之以地面同步和加密观测,开展遥感产品真实性检验。②专题试验:开展"非均匀下垫面多尺度地表蒸散发观测试验",采用密集的涡动相关仪、大孔径闪烁仪与自动气象站的观测矩阵,为揭示地表蒸散发的空间异质性,实现非均匀下垫面地表蒸散发的尺度扩展,发展和验证蒸散发模型提供基础数据。③应用试验:在流域上、中、下游分别开展针对积雪和冻土水文、灌溉水平衡和作物生长、生态耗水的综合观测试验,将观测数据和遥感产品用于上游分布式水文模型、中游地表水—地下水—农作物生长耦合模型、下游生态耗水模型,通过实证研究提升遥感在流域生态—水文集成研究和水资源管理中的应用能力。加强试验将在2012年5月起按中游、上游、下游的顺序展开,全流域持续观测期为2013—2015年。在各类试验的支持下,开展全流域生态—水文关键参量遥感产品生产,发展尺度转换方法,建立多源遥感数据同化系统。  相似文献   

SL3-1型双翻斗雨量传感器常见故障处理及误差调节     

周继先  聂云  孙啶棚  袁庆  何博 《中低纬山地气象》2021,45(6):122-125

通过对SL3-1型双翻斗雨量传感器结构和工作原理进行分析,找出雨量传感器易发生故障现象、原因和维修方法,总结雨量传感器在校准过程中的注意事项和误差调节方法,供同行借鉴参考。  相似文献   

面向应用的CBERS-02星高分辨率相机成像数值模拟技术框架     

邱振戈  甘甫平  尤淑撑  岳庆兴  张春玲  贾永红 《国土资源遥感》2009,20(1):18-22

技术框架研究的目标是准确仿真卫星高分辨率相机成像过程中辐射和几何质量的下降情况，从应用方的角度建立评价高分辨率卫星相机在国土资源领域的应用潜力和技术框架，并以CBERS-02B星HR相机在轨成像模拟为例进行了原理验证，同时对今后以国土资源应用评价为目标的高分辨率相机在轨成像模拟改进方案提出了建议。  相似文献